Exakta

The Exakta is a type of Octagonal trumpets. From the forties till the seventies octagonal trumpets were made by GDR makers from Markneukirchen operating in the Sinfonia and Migma groups, like Kurt Knoth, A.K. Wunderlich and Johannes Scherzer. "This peculiar shape of brass instruments was interesting to show orchestra's. That was going on already in the 1940s", says museum direktor Heidrun Eichler from Markneukirchen.

The company A. K. Wunderlich in Markneukirchen was known for their 'Exakta' trumpets, but also build french horns and trombones. It was founded in 1907 by Alfred Wunderlich(26.05.1883 - 01.01.1969).

1 The Exakta and other octagonal bell trumpets from Markneukirchen
2 Wunderlich's Exakta
3 Migma & Sinfonia
4 Alberto, Albert Wolfram Markneukirchen
5 Super
6 Horst Voigt, Markneukirchen
7 Joseph Pscherer
8 Erhard Sawatzki's dodecagonal trumpets
9 No names
10 The Arigra
11 Other trumpets with hexagonal valve casings
12 Sources

The Exakta and other octagonal bell trumpets from Markneukirchen

Brass instrument maker Mario Weller from Markneukirchen, who researches the history of 20th century brass instrument making in Vogtland, told me in March 2013: „Most of the brass instrument makers in the Vogtland made their octagonal bells out of standard bells, on their own rods. That's known for the workshops of Johannes Scherzer, A.K.Wunderlich and for the 12-sided version that came from the workshop of Erhard Sawatzki. The basic bells for all three workshops came from bell maker Heinz Nürnberger, formerly Firma Ernst Dölling, Markneukirchen. Heinz Nürnberger is known to have had his own 8 sided rod, that he lent to another Sinfonia member (Otto Meinel) when needed. Also known is that around 1950 instrument and bell maker August Reichel jun. made octagonal bells and sold them to Vogtlandian instrument makers.

Wunderlich's Exakta

The Exakta logo was used already by Alfred, so before 1938

Wunderlich Exakta luxury version with goldlacquer on valve caps and bottoms and inside bell, coll.: Gerard Westerhof

The company A. K. Wunderlich in Markneukirchen was known for their 'Exakta' trumpets, but also build french horns and trombones. It was founded in 1907 by Alfred Wunderlich(26.05.1883 - 01.01.1969). His father and brother were both active as brass instrument makers. Alfred joined with this brother under the name „Gebr. Wunderlich“. Around 1938 his son Kurt Wunderlich (16.05.1908 - 10.05.1994) became his partner, hence the name A. K. Wunderlich ('A' for Alfred, 'K' for Kurt). In the shop at Mosenstraße 10 they had up to 6 people working. Many apprentices were trained, some of whom continued their craftsmanship in a workshop of their own.The company was dissolved in 1990.

Most of their octagonal trumpets were build from 1945 till ca. 1970/75, After that interest strongly declined. Here's an Exakta, A.K. Wunderlich, with the caracteristic triangular spin that also is found on Sinfonia instruments, and gold lacquered valve caps and bottoms. The inside of the bell is also gold lacquered.

Catalog "Alles für den Musikfreund', GHG Möbel- und Kulturwaren Bezirk, Karl-Marx-Stadt, Klingenthal

This Wunderlich Exakta is listed in a 1961 catalog from the Grosshandelskontor für Möbel-und Kulturwaren from 1961. It comes in three versions, with only the bell octagonal, bell and valve block octagonal and a fully octagonal one (except tubes). In a 1962 pricelist it's offered for (DDR) DM 275, DM 365 and DM 400 for the luxury version. Here's another Exakta, with an octagonal bell rim.

A.K. Wunderlich Markneukirchen Migma, (mouthpiece: WERMA Compakt 18)
octagonal bell rim

A double-braced Exakta

A.K.Wunderlich ca. 1960, double brace, coll. Trompetenmuseum Bad Säckingen

Wunderlich made these octagonal bell trumpets with hexagonal shaped valve casings but also with round valve casings. Hammered tubes are found on a lot of these trumpets, others are engraved.

He also made trumpets with hexagonal valve casings and a round bell. Here's an Exakta with the name Weltton on the bell. The Weltton ('world sound') brand was used between ca. 1953 and 1977.

Exakta Weltton, source Göran Christensen SV

The bell engravings also vary to quite some extent. AK Wunderlich and Markneukirchen and/or Migma are common. There's also an 'Originel Wunderlich'.

Wunderlich also made Exakta octagonal trombones with double braces.

Exakta trombone, source: Horn-U-copia

Exakta trombone, engraved Meinel & Herold Klingenthal, source: Ebay.de 2017

Migma & Sinfonia

Musical instrument makers around Markneukirchen were organised in cooperatives, for the purchase of materials and selling of products. Wunderlich was member of Migma, an acronym for "Musikinstrumenten Genossenschaft Markneukirchen", a cooperative with at a time several hundred musical instrument makers, established in 1943 and still existing. Other workshops were organised in Sinfonia, a production cooperative (PGH, Produktions Geselschaft) that existed as of 1960. In the seventies, wenn it became clear that with export of hand made instruments foreign currency could be acquired, the PGH Sinfonia was transferred into a 'Volkseigene Betrieb' (VEB Sinfonia), a state organisation. In 1984 the VEB SINFONIA became VEB Blechblas- und Signalinstrumentenfabrik Markneukirchen. In 1990 VEB B & S became the Vogtländische Musikinstrumentenfabrik GmbH (VMI).

Members of PGH Sinfonia were amongst others Johannes Scherzer, who in 1961 took over the workshop of his uncle Kurt Knoth (both using the tradename 'Rino'), Karl Mönnich, Albert Wolfram, Otto Meinel, Walter Mönnig, Erhard Sawatzki as well as the Philipp Reichel workshop with his 'subdivisions' Armin Glier and Klaus Wolfram.

The workshop of Kurth Knoth and his successor (and nephew) Johannes Scherzer made several hundreds of octagonal trumpets, according to Mario Weller. Kurth Knoth took over the Rino workshop from his father Emil in 1935, and moved it to the Mosenstraße 13 in Markneukirchen. In 1961 Kurt Knoth who was a member of Migma, joined the PGH Sinfonia. As of 1961 Johannes Scherzer was in charge of the workshop. The Scherzer workshop then in 1984 became part of the VEB Blechblas- und Signalinstrumentenfabrik.

Here's an octagonal trumpet engraved Kurt Knoth Instr.Baumeister with trademark Rino and sold through Migma, with hammered tubing and gold wash bell. Dated 1940 -1950 by the 2014 Ebay seller, but as it's engraved Migma it can't be before 1943.

A Rino octagonal trumpet with Sinfonia on the spin and Rino on the bell and pinky hook. As it's marked Sinfonia it must be later than 1960

Kurth Knoth Rino Sinfonia, valves numbered 37, 38 (2), 39 source Ebay.com 2015.

Johannes Scherzer, Sinfonia, 1979 silver plated & gold lacquered, coll Heikki Moisio Finland
Johannes Scherzer

Here's another trumpet marked Scherzer, with octagonal valve casing, bottoms and caps, similar to those of the Kurth Knoth above. This one however has a hexagonal bell and hexagonal ferrules. It was offered on Ebay from 2014 till 2015 by instrument maker Simon Freyer in Friedrichsdorf, who believes it's a one off. The serial number is 4956, the valves are marked 37,38,39.

Scherzer hexagonal trumpet, serial number 4956, source Ebay 2014

As a side step, a no name trumpet that presumably also has it's origins in Markneukirchen. Some octagonal tubes, hammered bell, valves and other details hexagonal. On the bell: Musik Kapelle 'KVB' No 2. The seller suggests that it may have been playd in the orchestra of the Kölner Verkehrs Betriebe (the transport company of Cologne) .

Alberto, Albert Wolfram Markneukirchen

Albert Wolfram (+2007) who started his workshop in 1957 used the tradename Alberto. His son Gerhard Wolfram is the last known instrument maker in Markneukirchen still building octagonal trumpets.

Meister Albert Wolfram, Sinfonia, marked Alberto, valves numbered 49,50,51
A.Wolfram valve block marked V 1615 1561
A.Wolfram valve block marked V 1617
A.Wolfram valve block marked V 1773

The octagonal trumpets of Albert Wolfram appear regularly at sites like Ebay.

Now here's a similar trumpet marked Meister K.Wolfram. The seller states the modelname is Jupiter. The seller of another K. Wolfram trumpet dates it around 1955.

|Meister K.Wolfram Sinfonia model Jupiter, marked D162 K.Wolfram Sinfonia, ca 1955

Super

An octagonal trumpet with a valve block similar to the above Wolfram appeared on Ebay in 2016. It has the name Super on it, a number (624?) on the valve block and no Sinfonia spin.

Super, source Ebay.de 2016

Horst Voigt, Markneukirchen

An octagonal cornet was signed by Horst Voigt, Markneukirchen. Horst Voigt (1920 - 1994) was educated at A.K. Wunderlich and opened his own workshop in 1951. In 1953 his many years younger brother Helmut joined him.

Horst Voigt cornet Markneukirchen

Another octagonal cornet that has octagonal valve caps and valve casings. No makers name, presumably older than the Horst Voigt cornet and definitely no Arigra as is suggested in it's ebay ad

octagonal cornet,source g.mu6 ebay.com

Joseph Pscherer

catalog issued by GHG Karl-Markx-Stadt, 1961, source: Ebay 2016

Meister Joseph Pscherer was born in 1909 in Eibenberg (7km from Graslitz, now Czech). According to Mario Weller, he got his education in Graslitz and worked from 1953 till 1978/1980 in Klingenthal, 7 km from Graslitz on the German side of the border. He passed away around 1996. Pscherer always worked alone and had his instruments sold through the Migma collective, and incidentally also through PGH Sinfonia, as Weller states. This instrument has no reference to either Migma or Sinfonia.

Other workshops made octagonal trumpets under the Sinfonia name, some are only marked Sinfonia, without a maker. A 1961 GDR catalog shows an octagonal trumpet, in luxury version. It has gold lacquer in the bell and on the bows. The catalog ("Alles für den Musikkfreund") was issued by the Grosshandelskontor (GHB) für Kulturwaren in Karl-Marx-Stadt (now Chemnitz). The GHB was a new wholesale organisation in the socialist GDR that existed as of 1960.

Erhard Sawatzki's dodecagonal trumpets

Erhard Sawatzki (03.08.1924) was educated at the A.K. Wunderlich shop from 1939 till 1942 and worked there till April 1963. He worked as in independent instrument maker from 1963 till 1990, being a member of Sinfonia, where his workshop had the number 4, as a prefix to their serial number. He made trombones, trumpets, flugelhorns, cornets, tenor and french horns in different models, some 2000 instruments all together. His specialty were dodecagonal trumpets, with bell, valve caps and tubes 12-sided.

Erhard Sawatzki, Sinfonia, 'Made in GDR', after 1963, before 1985 serial number 4 260, valve block marked X5230 coll. Gerard Westerhof.

Erhard Sawatzki SAMA Sinfonia after 1963, coll.Gerard Westerhof

Sawatzki sr.nr 4 1372, R17 on the valve block, coll. Silvio Notarbartolo
Sawatzki sr.nr. 4 1413 with a different main slide brace, source Ebay.de 2016

Here's a Sawatzki dodecagonal trombone, offered on Ebay in 2019. It's marked SAMA and Sinfonia and has number 4 162, so one of his earlier instruments.