Ernst Modl brass instruments
Every now and then an Emo trumpet pops up on Ebay and other auction sites and a potential buyer asks: 'who knows more'. Little is known about it's maker Ernst Modl who's career started before WWI in Bohemia and ended after WWII in West-Germany. Often the link with Louis Armstrong is mentioned and there are these still available Emo mutes.
On this page I collected the available information. Starting with his pre WWII career in the F.X. Hüller company in Graslitz, the war years, his patents, and an overview of his instruments with serial numbers that appear not only under the Emo brand but also under names like Ludwig, Buffet Crampon, Rudy Muck, Smith Music Sales and Waterloo. Trying to connect things and hoping for additional information to come.
Note: This page focusses on brass and on the career of Ernst Modl. More information about F.X.Hüller and their (pre war)saxophone production you can find at F.X.Hüller.com
Contents
Before WWII
The life of Ernst Modl starts on July 4th 1892 in Graslitz, Czechoslovakia. Graslitz, now known as Kraslice, is a town close to the border with Germany. It was then part of the Austro-Hungarian empire. Graslitz housed an extensive production of musical instruments, brass and woodwind, but also harmonicas. The other economic pillar was textile industry. At the beginning of the 20th century, there were 86 middle and smaller textile factories and 11 musical instrument factories in Graslitz. There were also 40 independent companies that either produced musical instruments or their components.
I'm not sure about the ancestors of Ernst Modl. There's a Josef Modl listed in 1771 as musical instrument trader, living at Modlgasse 371 (549) in Graslitz. One of his descendants was also called Josef Modl, rotary valve block maker and trader of wind and string instruments in the early 1900's at Modlgasse 542/786 in Graslitz, with his workshop founded in 1848. In 1913 Josef Modl is listed along with F.X.Hüller as one of the two Graslitz makers that participate in the newly registered O.Hebron export firm in Berlin, together with a lot of Markneukirchen based traders.
Until WWI the city was booming. In the years of the First World War, the economic boom stagnated. In 1918, Austria-Hungary, to which Graslitz belonged, disintegrated, and the Czechoslovak Republic was founded. After WWI production in Graslitz quickly recovered and at a time there were 59 musical instrument manufacturers in the area including such names as Bohland & Fuchs, F.X.Hüller, A.K. Hüttl and Julius Keilwerth.
Ernst Modl Metallwarenfabrik
From ca. 1918 till 10-05-1920 Ernst Modl is listed as maker of rotary valve blocks (G.Dullat). In the catalog '400 Jahre Musikinstrumentenbau in Graslitz' Dullat also mentions Josef Modl at Modlgasse 542 (786), and he states that it's the same as Ernst Modl at Modlgasse 786, who's listed as 'Maschinen- und Metalblassinstrumentenbau sowie Herstellung von Geschossteilen". That could mean that Ernst was a son of Josef, wouldn't it?
The magazine Elektrotechnik und Machinenbau, Volume 37, Nr 8 has an ad on April 6th 1919 of Ernst Modl Metallwarenfabrik, Graslitz i. Böhmen (Bohemia), producing of all kinds of nipples, clamps and sheet metal screens. 'Best prices. Best performance. Fast delivery.' the ads says. It doesn't give a street name/address. So Ernst started a workshop on his own.
F.X Hüller & Co
On 09/06/1919 Ernst Modl marries Philippine Hüller, the daughter of Franz Xaver Hüller. In 1922 a daughter is born. His father-in-law F.X. Hüller was a leading instrument maker in Graslitz. By 1910 Hüller had 200-250 people at work. He built and traded wind instruments and stringed instruments. Hüller, born on December 29th of 1856, in the nearby Pechbach founded his factory in 1882. He then bought the ruïns of the 'Knappschaftsmühle', a burnt mill, and on that spot in 1898 he had a factory and a house built. The factory was known as the 'Schied-Fabrik'. The address was Eibenbergerstrasse 440, now called Wolkerova in the Grunberg part of Graslitz (now: Zelená Horá in Kraslice). House nr 1066 is right behind the factory and is the Hüller villa at the Knappschaftsgasse/Nerudova (cást).
Ernst Modl joined the company in 1919 after he married Philippine. Her sister Susanne had married Anton Riedl (6/6/1884-11/25/1935) in 1911, he joined the Hüller company in 1911. (note: this Anton Riedl is another one than the maker of the Arigra octagonal trumpets).
In 1920 on the first of March Modl and Riedl together with Philippine and Susanne Hüller became partners in the company (Hüller himself was aged 63 by then). On March 29th 1920 the name of the company changed therefore in F.X.Hüller & Co (F.X.Hüller a Spol in Czech). Modl took on the role of the inventor and craftsman, while Riedl took care of the management and the sales. (Uwe Ladwig). 'He never built an instrument' (Rippert)
In 1921 they were enlisted in the trade register in Markneukirchen, Hüller as manufacturer, Modl and Riedl as Kaufmann (businessman), with the addition that their wives were not allowed to represent the company. In 1929/1930 they are still listed in the Markneukirchen address book. Hüller & Co was one of the first Bohemian factories to establish a branch in Markneukirchen. In 1929 he is listed there at the address Roter Markt 13, and later on in Klingenthal, both only a few kilometres away from Graslitz but then part of the German Empire. The instrument makers in Bohemia exported a lot. Their branches in Saxonian Vogtland helped to get their products al over the world. Especially when they had to deal with the big market crisis and growing tariff barriers as a result of that in the early thirties.
In 1923 F.X. Hüller & Co starts with the production of saxophones, first led by Max Keilwerth. There is an saxophone catalog from F.X.Hüller & Co with World saxophones, to be dated around this time (see: F.X.Huller.com). This catalog states in it's english text that Hüller wants to secure his place amongst the leading manufactures of musical instruments. The German text is more explicit: it says that they can take the first place already. Thanks to 'a staff of hardworking and thoroughbred assistants, both technical and mercantile', which seems to be a reference to Riedl and Modl. In the twenties F.X.Hüller & Co also starts with new English model names. In a 1920's catalog World is the name of the most luxurious saxophones. There's also a new 'jazzy' logo that's found on the '1923' catalog.
F.X.Hüller Graslitz Böhmen, the old logo, featuring an angel with a harp
F.X.Hüller K. und K. priv.Instrumentenfabrik. As of 1911 Hüller was permitted to use the two headed imperial eagle in his logo.
F.X.Hüller & Co, jazzy World logo
The jazzy logo is also found on instruments that went to Romania (Georg Huber, Timisoara, a shop for musical instruments 'representative' for Hüller) and Germany (C.A.Wunderlich, a trader in Siebenbrunn in Vogtland, close to Graslitz on the other side of the border.)
Huber bariton horn with World logo
C.A.Wunderlich saxophone with World logo
A very rare bird is this bariton horn with the new World logo but also the brand name Hüriemo. Which is an acronym for HÜller, RIedl and MOdl. A common practice in Graslitz and the nearby Markneukirchen. But so far I found only one instrument with this name. Maybe they choose pretty fast to use only the World model names.
Two F.X.Hüller & Co, Graslitz Czechoslovakia baritone horn with jazzy World logo. The one to the right is also branded Hüriemo, the one to the left has a lowered pitch
Several years later in 1932, an additional catalog presents the cheaper Professional and Champion models and next to the World model there is a World de Luxe series (called World Luxus on the German market), for saxophones, trumpets and trombones. (The mutes offered in this catalog are from the Shastock and Jedson brand.)
In the early thirties Hüller trumpets had one or two straight braces in the main tuning slide. Horn-u-copia features two early Hüller & Co trumpets with straight braces and a naked lady, a feature that was made famous by C.G.Conn.
F.X.Hüller & Co World (left) and World Luxus (right) trumpets, both with a naked lady on the bell, source:Horn-u-copia
F.X.Hüller catalog pages from around 1932
At the end of the thirties the braces of the trumpets are bent in a way that reminds of the King Liberty trumpet models. The naked lady and the jazzy World logo disappear in favour of Art Deco styled engravings of the model names.
F.X.Hüller a spol, Kraslice, Champion trumpet, left: valve numbers 31,32,33, right: valve numbers 94,95,96
F.X.Hüller & Co World trumpet
In a F.X. Hüller catalog dated 1939 the Professional model seems to have disappeared, and a World Super model is added, between the World and the World de Luxe. According to this catalog the World de Luxe is also available with hexagonal valve blocks, finger rings and waterkeys. A wink to the Arigra like trumpets of the time.
Pages from a F.X.Hüller & Co catalog dated 1939, source: FXHuller.com.
F.X.Hüller a spol, Kraslice Champion trombone
.png)
.png)
.png)
F.X.Hüller a spol, Kraslice, World trombone
F.X.Hüller & Co, Graslitz sousaphon, traded by G.Huber in Romania.
F.X.Hüller & Co, Graslitz C.S.R, kaiserbas, 123 cm high and a bell diameter of 61 cm, coll.Uwe Schneider
Between 1926 and 1932 the company had listed various (D.R.G.M.) patents, like the one for the Jazzophon (1926: DRGM 995305), and one for a top action rotary valve trumpet (1929: DRGM 1087757, 1088742).
Jazzophon
Jazzophon marked F.X.Hüller & Co Graslitz, incomplete
The Jazzophone and the Top action rotary valve trumpets were inspired by the jazz craze that came over from the US. As did the exploded production of saxophones.
Ernst Modl might be behind these F.X.Hüller & Co patents as Hüller himself was already in his 70's by then and Modl has a reputation as 'inventor' and listed a lot more patents after WWII (see below).
F.X.Hüller a Spol, Graslitz, top action rotary valve trumpet, model Champion
In 1935 Anton Riedl dies at the age of 51. He is skipped as partner. One year later, in 1936 Franz Xaver Hüller passes away aged 80. That means that Ernst Modl was the only acting director of the company as of then. Riedl had been in charge of the management and sales aspects of the business and the firm suffered as a result of his death; 'the company began to lurch' as Uwe Ladwig says. The death of Riedl wasn't the only factor I guess, the musical instrument business around Graslitz (and the nearby Vogtland) was declining as a whole since the world crisis of 1929. Unemployment in Graslitz reached a climax in 1934 at 37.9% of all working people.
In 1936 the company wanted to start a workshop in Klingenthal but this project apparently failed due to the objection of the Czech Ministry of Economic Affairs, as the branch would have caused considerable damage to the industry's carry-over, so Gunther Dullat. Later they opened a branch in Klingenthal (foto met F.X Huller Klingenthal) By then F.X.Hüller & Co was one of the biggest companies in town along with Bohland & Fuchs (500 employees), A.K. Hüttl (350), V.Kohlert (300), Stowasser and textile firms like J. L. Ball &Co (500), Durst & Krey (150), Stark & Köstler (700)
In an adress overview of Graslitz that's dated around 1938 'F.K. Hüller' is still listed on Knapschaftsgasse nr 1066, the villa next to the factory. But at a certain point Ernst Modl and his family must have moved in, because at the end of the war they are registered at this address.
WWII
In 1938 Graslitz (by then more than 35.000 inhabitants) and Sudetenland as a whole became occupied by Nazi-Germany. October 1st saw Wehrmacht forces invading the territory.
On October 4rd Adolf Hitler came along in Graslitz. As a result of the Munich Agreement Graslitz in 1938 was incorporated into the German Reich. From then until 1945, Kraslice was the district of Graslitz in the administrative district of Eger in the Reichsgau Sudetenland.
Military horns
As of 1939 F.X.Hüller & Co and other factories were used to build aircraft parts and war equipment. (Dullat 400). But in those years there were still all kind of instruments made. Traditionally Hüller had built instruments for the military. The tenor horn and the alto sax with WL inscription below were built for the music corpses of the airforce (Wehrmacht Luftwaffe), the horn for the music corps of Gebirgsjäger Regiment 139 (Mountaneer regiment).
Alto saxophone F.X.Hüller & Co Graslitz Sudetengau No. 942 WL Copyright 1938
Hüller produced also bugles for the Hitler Jugend and the German Army. They all have a year of production engraved.
Each Hitler Jugend Bann had a band and each Stamm had a Drum & Fife or Drum & Bugle Corps. The bugles were modeled after the old Army pattern and were tuned to "C". Brass and German nickel/silver construction. The chain is to secure the mouth piece to the bugle. Total height is approximately 28cm. It has a raised HJ pattern eagle, clutching a sword and hammer with swastika superimposed to breast, to horn top.
I found several army bugles.
Signal bugle F.X. Hüller & Co Graslitz 1939, source Worthpoint.com
World War II German Army Signal Bugle. F.X. Huller & Co, Graslitz, 1939, source Worthpoint.com
Wehrmacht signal horn F.X.Hüller Graslitz 1939 source: ww2.ru
A seller of one of the army signal horn adds: these were carried by German soldiers throughout the war. Most of the photos of these are from the early war period when the Germans still had enough infantry soldiers that they could launch large scale infantry type offensive operations.
It's interesting that, where Hüller & Co never dated their instruments (and in the case of brass even no serial numbers are known) these instruments are all dated 1939.
I found one similar F.X.Hüller & Co bugle dated 1940 and that's it for now. As far as I know no other dates are found on instruments (except from the 'Copyright 1938' date on saxophones, which refers to a Herbert Menge patent, but that's a different story). The other thing is that these instruments are all related to the military. Was there an obligation (from the Nazis) to produce instruments only for the army (and Hitler Jugend...). Had they to be dated because of the scarse copper? Similar dating is found on WWII bugles from other makers, on bugles around WW1 and on UK bugles.
Ernst Modl claimed a patent at the German Reich patent office (of which Czechoslovakia now was part) for a ball joint connection for rotary valves in wind instruments. He claimed it October 4th 1940 it was granted on December 24th 1942 and published in Januar 1943. (pdf to be attached)
Soon afterwards production of musical instruments stopped completely. The company is said to have been closed during World War 2. But, like other factories, the premisses were used for war production.
War economy
After the annexation Sudetenland was quickly incorporated in the German war economy. In the Sudetengau, there was neither war equipment nor ammunition production before the outbreak of war. Therefore new businesses had to be created. The most important new forges in the Sudeten area were state-owned companies built according to the "Montan scheme". The Montan scheme was based on trust agreements between the German Reich and the private sector. Private companies (parent companies) received an order from the Army Inspectorate (HWA) for the construction of an armaments company at government expense. A shell contract was concluded between a parent company and the HWA and a subsidiary was founded, which leased the plant from the army's own society for Montanindustrie GmbH (Montan GmbH). In this way, at least 119 companies were created by the end of the war, employing 190,000 people on November 1, 1944. According to this principle, six large arms factories were founded in the Sudetengau in 1939-1940, which were generally treated preferentially in the allocation of labor. Nevertheless, the newly founded ammunition factories in the Sudetengau suffered from labor shortages.
Emo Leichtmetallbau, Ernst Modl & Co. KG
On 29-01-1941 Ernst Modl becomes the only company representative for F.X.Hüller & Co. The 1941 edition of Compass, Kommerzielles Jahrbuch Sudetenland lists F.X. Hüller & Co, Graslitz and as of 1942 Ernst Modl appears in the Jahrbuch with a separate entry. The 1944 version still lists both F.X. Hüller & Co, Graslitz and Ernst Modl & Co Komm.-Ges. (Kommanditgesellschaft, Ltd ) Grunberg. The archive of the Bank der deutschen Luftfahrt AG 1933-1945 lists Emo Leichtmetallbau, Ernst Modl & Co. KG, Grünberg/Sudetenland (until Nov. 1941: F. X. Hüller & Co., Werk II). There's also an audit report ( Prüfungsbericht) from 1939, a Balance sheet, income statement (Bilanz, Gewinn- und Verlustrechnung) from 1940, a location map from Grunberg/Zelena Hora and a company history from 1942. My hypothesis is that as of 1941 Ernst Modl used Emo Leichtmetallbau, Ernst Modl & Co. KG as a separate company for the war efforts.
The archive of the Deutsche Revisions- und Treuhand AG, 1925-1945 (in the Bundesarchiv) contains the (audits of the) financial statements as of 31 Dec. 1941 and 1942 of Emo Leichtmetallbau, Ernst Modl & Co. KG, Grünberg bei Graslitz. The archive of Bank der deutschen Luftfahrt also contains a contract between the German Reich and the Modl company from 1942/1943 and an additional contract from 1945 (Vertrag zwischen dem Deutschen Reich und der Firma, 1942/43, und Zusatzvertrag, 1945). There is also a document about the employment of 142 Russian workers in 1942 and arrests in 1943. (Bundesarchiv: Verstöße gegen die Betriebsordnung.- Verhaftungen bei der Firma EMO-Leichtmetallbau, Grünberg begin 1943. ) There's an extract of the commercial register from Oktober 21st 1944 and a Dr. Rieffert is mentioned as the sole manager and operator in 1944. Maybe the Nazis had taken over complete control by then? Maybe these documents can reveal if Modl was in the above mentioned scheme, they have to be researched yet.
Forced labor
The work at the Emo factory, located on the premisses of F.X. Hüller, was done by laborers from different sources, not only Russians. EMO owned a work camp were workers of various nationalities - the Czechs (19%), the Russians (61%), the French (12%), the Belgians (5%), the Dutch (3%) who were totally employed at EMO were interned. During the camp's existence - from February 1942 to April 1945 - there lived 450 people, including 4 women, wives of total workers, and 2 children born in the camp. (Tábory utrpení a smrti, Růžena Bubeníčková et al) , Jules van Egdom, from Belgium was such a forced laborer at EMO from 09.08.1944 tot 10.04.1945. According to Van Egdom the camp for Modl was in Schwaderbach (now Bublava), some 4 kilometers north. He knew that there were made musical instruments at that location before. Previously he worked in Fischamend and Schwadorf near Vienna (WNF Wiener Neustäter Flugzeugwerke), later in Kratzau (Spreewerk) until the liberation by the Russians.
Ausweis and Gestellungsbefehl from Jules van Egdom, declaring that he was working at EMO Leichtmetallbau.
Another forced laborer was Dutchman Theo Geijssen from Utrecht (1923-2013). He was in Graslitz before Van Egdom and his description makes me believe that he was at the EMO factory as well. "I was in Czechoslovakia too, it must have been in 1943. A group was selected and they went to Regensburg to work in the Messerschmidt factories, which were a little further away. But when we arrived in Regensburg, those factories were bombed and so we couldn't go to work there. So we split up again and went to Graslitz, a place in the mountains, where there was a village with a machine factory, and then we had to go to work there. We slept again in a Lager. We were there for about half a year, no longer. In Czechoslovakia we had no freedom at all, we didn't see much there either. You had to go all the way up the mountain, there you were sleeping. And then down, you were exhausted in the evening. I stood there all day behind a lathe, I had the day shift, you also had night shifts, which stood behind the same machine as where I was. Then I got comments that those from the night shift made 20 pieces of something and I only 10. So I had to work harder and when I said that I could not work harder, that machine had to be set faster. So I let that machine run faster and then it crashed, haha! It was not on purpose, of course not. If you didn't do what they said they threatened you to go to a concentration camp that was nearby, Theresiënstadt, a very tough camp. Of course you didn't feel like it at all."
The National Socialist war economy had an almost insatiable hunger for ever new workers. First the need for labor could be largely covered by the use of civilian foreign workers (like Van Egdom and Geijsen) and prisoners of war, but the labor market collapsed in the summer of 1944 due to the lack of influx. Forced labor was an essential pillar of the National Socialist economic system in both the Sudetengau and the Protectorate of Bohemia and Moravia. The massive expansion of the network of KZ satellite camps in 1944 was a reaction to the drying up of the influx of previously used groups of forced laborers. Thus, in many cases, a barely comprehensible genealogy of various camps with different groups of forced laborers developed in the same place.
Luftfahrtgerätewerke Hakenfelde
The first private enterprise, which established an external production camp in Sudetengau in December 1943, was the Siemens subsidiary Luftfahrtgerätewerke Hakenfelde GmbH (LGW), which operated another warehouse until the end of the war in Graslitz (Kraslice). These formed together with other satellite camps in neighboring Saxony and Bavaria, a separate sub-camp network. LGW relocated from Berlin to the territory of Sudeten, among others, to protect against air strikes. The headquarter for this branch became the textile firm (velvet production) J.L. De Ball, (now Sametex). (Untere Bahnhofstrasse/ Richard Wagnerstrasse 830 now Československé armády). The plants were housed in two facilities, 1 und II, in the factory buildings of Hupfer & Sohn (a woolen goods factory, at the Lehrerplatz/Dukelská, the former Hlawatsch & Isbary, since 1918 part of Vereinigten Schafwollwaren-Fabriken-A.G. until 1939, now housing the Amati factory), Julius Keilwerth (saxophone factory), Steubing & Co., (Maschinenfabrik, in 1941 listed as munition production, from 1939 in the former factory of Anton Richard Breinl, 229, 231,232 S munition production SudetenCompass 1941,1942, 1944) Hans Rölz (a musical toy company at Wolkerova 1269), and EMO Leichtmetallwerke in the Grunberg/Zelená Hora part of Graslitz.
Hans Rölz, Wolkerova čp 1289
Julius Keilwerth, Havlíčkova 1348
Hupfer & Sohn/the former Hlawatsch & Isbary/now Amati, Dukelská 44
Steubing & Co, the former AR Breinl,ul. 5. května čp. 231
J.L.Ball, now Sametex, Československé armády čp. 830
The relocation of a part of the LGW production to Kraslice was based on the creation of Arbeitslager Graslitz (Kamp Graslitz) at the De Ball factory. Milena Kalčíková, a prisoner in the camp of Svatý Kateřina, went to the new Graslitz camp to assemble the beds. She remembers: "The Kraslice camp was such a red building at the station. Burnt bricks." The camp was a women's camp. The (female) prisoners were housed on the floor above the factory hall of De Ball. Another source states that the womens camp was located in the former Durst & Krey dyeing plant at the riverside of the De Ball-complex. At the beginning of August 1944, the first 150 women from KT Ravensbrück were relocated to Kraslice. The Kraslice district camp was originally governed by KT Ravensbrück, but since September 1, 1944, it was included under the Flossenbürg KT. In December there were already 483 prisoners. In March and April 1945 this number increased rapidly to the number of 900. The cause was evacuation transport of other camps, as it was in the case of Svatavy. Kalčíková: "Most of the women in the camp belonged to the German 'asocials', the rest a few 'political' Russians, a French woman, a few 'asocial' Polish. There were also 15 Czech political prisoners and 29 Czech and Slovak gypsies."
At the Hans Rölz factory the Messerschmidt 262 was build in 1944. In the J.L. de Ball factory parts for fighter planes of the German Air Force, possibly also parachutes, and hammocks for the Afrika Korps were made. At EMO Leichtmetallbau the tail pieces and parts of the landing gear for aircrafts were made.
There now is a textile company (Sametex S.A.) in the former camp. There is a commemorative plaque on the wall of the building with the inscription: "Arbeitslager Graslitz, branch of KZ Flossenbürg was located in this building in the 2nd World War".
After WWII
Kraslice was liberated on May 7, 1945 by the US Army. Only 18 Czechs lived in the town at the beginning of May 1945, but new Czech settlers soon appeared and this number doubled within a few days. The first settlers were Czechs returning from Germany from total deployment and concentration camps, the first Czechs inland came to Kraslice on May 18th. Kraslice became one of the "happier" cities that did not have to experience the most drastic postwar excesses on the part of the Czech population, due to it's geografical location in the American zone. US troops left the city in November 1945.(Archive Kraslice)
Displacement of German population
The twelfth article of the Potsdam Agreement, signed on August 2, 1945, prescribed an "orderly and humane" transfer of the German population from Poland, Czechoslovakia and Hungary. In the case of Kraslice, the Germans were selected on the basis of three categories. The leaders of the German organizations were to be postponed, only those who were in the process or the expectations of the court or questioning could remain. Similarly, former state and public employees were to leave, this time without exception. Only the third category - manual workers and entrepreneurs - was hit harder by the Czech labor force. While traders, farmers and workers were to be displaced "if not needed", miners and specialists had to stay. It was the latter who, among other things, had the task of passing on their knowledge and experience to the new arrivals of the colonists, taking over the "detached" region. The practical side of displacement was the responsibility of the District Administrative Commissions (OSK). These committees acted as individual units, but there was a certain level of intercity cooperation within the regions on the German population. Between the OSK and the US military administration during the first post-war months, there was a noticeable friction, especially because of the aforementioned unwillingness of Americans to agree to an indiscriminate Czech approach to the inhabitants of German origin. Due to the temporary closure of border crossings in the summer of 1945, refugees from the eastern part of the country began to accumulate in border towns, trying to get out of the Soviet zone and into Germany. So the OSK was supposed to secure their accommodation and take care of it until the next border opening, which led to a deeper sense of grievance and disgust on the part of local Czechs. Around forty thousand transferred Germans have accumulated in small Kraslice, and their improvised accommodation had to be arranged in the workers' quarters of Steubing & Co. In addition to the Steubing factory, an EMO accommodation facility was established, which was formerly part of the EMO factory and accommodated 700 people. In both centers the Germans stayed only days or a maximum of one or two weeks before they were sent by train to the west.
The German households received a so-called "Einberufungsschein" (call-up certificate). With the following content (for Graslitz): "You have at least 24 hours after receipt of the notice of appeal with your family in the Collection point ......................... (EMO or STEUBING). Each person is allowed to carry a baggage weighing no more than 50 kg (blanket, pillows, necessary clothing, underwear, shoes and everyday necessities), including food. Upon leaving the collection center, the person summoned must lock the apartment, cover the keyhole with the upper section of the notice of appointment with the head OSK, whereupon the name and address must be written down. All neatly bound apartment keys provided with name and exact address, are handed over at the MSK - housing offices (persons from Kraslice directly in the collection point) together with list of the things left behind in the flat.
Ernst Modl was on the September 5th 1946 train to Nürnberg in West Germany. Aged 54, labelled as 'mechanist' (and not as an instrument maker), with his wife Philippine (51) as household. Train number 14, wagon number 22. Franz Riedl (19) the son of Anton and Susanne, had already left with the train 18-03-1946, with train nr 2, wagon nr. 16. At that time Ernst Modl and his wife and Franz Riedl still lived at the house nr 1066, the villa next to the factory were Franz Xaver Hüller had lived before. The fact that Franz Riedl lived with the Modls could imply that his mother Susanne had deceased by that time. Modl's daughter went to München and stayed there.
In 22 transports between February 28th and October 22nd 1946, 22461 people were displaced from the Kraslice district, from Kraslice alone it was 11,306 people. At the end of 1946, 11531 inhabitants were in Kraslice, of which 7108 were Czechs. During 1947, three more German transports were dispatched. At the end of 1947 the town of Kraslice had 6463 inhabitants, of which 4300 were Czechs and 2042 Germans. The very narrow focus of the Kraslice economy was the reason for allowing more Germans to stay than in other cities and regions. While in the areas of agriculture or heavy industry there was no need to teach new immigrants with the help of German experts, traditional ornamental textiles and the production of musical instruments - with which the Communist regime wanted to continue - were fields whose specialization had to be passed on from the original population to the new ones. Until the 1950s, the German-speaking German population made up forty per cent of the total population (partly due to abstaining experts, partly due to mixed families allowed to remain in Czechoslovakia).
Nationalisation
In 1945 there were 31 larger plants in Kraslice, employing more than one hundred employees, another 88 employing more than ten employees, and many of them still domestic workers. In the vast majority of establishments the producers of musical instruments or their components were working, another significant part consisted of manufacturers of embroidery and lace. All commercial and craft trades and agricultural holdings of German owners were confiscated. Companies with a staff of 21-300 were within the scope of OSK, with more than 300 employees, they were subject to the National Country Committee. Many trades under the national administration gradually disappeared and were disposed of, some merging and creating cooperatives, others gradually merging into national enterprises between 1949 and 1952. As a result of this development, in 1953 there were only four large national enterprises in the field of musical instruments and textile production. They were Amati, Lace, Leko and Ohara. The Amati National Company was formed by the incorporation of 10 inland races to the original Amati cooperative with a founding meeting on 17-10-1945, in the canteen of Hüller, as a source says. It which combined a total of 322 confiscators producing musical instruments on the territory of the Kraslice district. F.X. Hüller & Co was one of them, others were Josef Glassl, Bohland & Fuchs, Julius Keilwerth, A.K. Hüttl, Franz Michl and Kohlerts Söhne. In 1948, the cooperative was nationalized, working back till 1-1-1947. The individual plants were gradually closed down and the production concentrated on Hans Rölz, Köstler and originally the Hupfer textile factories.
The Czech Law Survey provides a notification about the Decree on the Nationalization of EMO-Leichtmetallbau Ernst Modl and Co., KG in Zelená Hora u Kraslic on December 27, 1945. The nationalisation of EMO-Leichtmetallbau came immediately into effect. In an official magazine (Úradný vestník) from 1948 we find a regulation from the Ministry of Industry: "on the nationalization of mines and certain industrial enterprises, incorporate, in agreement with the Minister of Finance, the assets of EMO-Leichtmetallbau Ernst Modl & Co., KG, based in Zelená Hora near Kraslice, within the scope of its nationalization to Perun, laundry and cleaning plant, national enterprise."
In 1952 the legislation on compensation for war damage (Lastenausgleichsgesetz) was adopted. In the archive of the Heimatauskunfststelle Regierungsbezirk Eger, Emo Leichtmetallbau is mentioned in 1953.
The old buildings of F.X.Hüller/Emo Leichtmetallbau in Graslitz are today used by a concrete company. In the early 2000's there were parts of John Deere tractors en machinery made.
Neustadt an der Aisch
From Nürnberg, where the train brought him, Ernst Modl went 44 km northwest to Neustadt a/d Aisch, his first known adress being Nürnberger Strasse 27.
Not much is known about his first years there. There is a story Mario Rippert told me, that after his expulsion Modl should have become the manager in London for Selmer London. He had good contacts to Premier Drum and Selmer London before the war as he made components for the drum manufacturing. He was there for a week and looked at it, but then went back to Neustadt a/d Aisch, said 'they only have tea-time'. He was just used to work.
But on December 3rd 1949, he applies for a Gebrauchsmuster (a kind of 'patent light') for a mute with a sliding cup shaped part (a 'Husch-Husch'mute) for trumpets and trombones. His 'invention' is a rubber ring keeping the two parts tied instead of screws, making the sliding faster and easier. It's granted May 22nd 1950. In the application form he calls himself Musikinstrumentenmacher. At the same time he claims a patent for the impregnation of cardboard made mutes with 'IGECOLL F', a product of BASF, the Badische Anilin- und Soda-Fabrik.
Modl started production in Neustadt a/d Aisch under the name F.X.Hüller & Co, Blechblasinstrumente, founded 01-01-1950 (or 05-09-1950?). He didn't make saxophones anymore. He started without money with repairs in an old pigsty, started with the production of mutes, then the production of rotary valves is added. The company’s first new instruments were built in the early 1950’s. Anton Riedl’s son, Franz Riedl (3-3-1927 / 1-9-2008) joined Modl in the resurrected business. Like his father, Riedl’s primary contribution was made in administration and sales, next to his job as musician.
On May 5th 1950 he applies for another mute patent, this time for a wow-wow mute, the invention being that the mute was made of presspan (cardboard) instead of aluminium and the two parts stuck together. The application form has no drawings attached but I guess the idea is a bit like the right mute below, that's still for sale. (pdf to be added)
Emo aluminium wow-wow mute, source: Thomann.de
Emo plastic wow-wow mute, source: Thomann.de
Modl applied for another patent regarding rotary valve instruments (on 16-10-1950). This one should make the assembly of rotary spring valves much easier and serial production possible. It was granted 13-9-1951. (pdf to be added).
In 1951 Modl produced signal instruments with already 12 employees at the Nürnbergerstrasse 27. In 1952, a second workshop is purchased, at Zeppelinstrasse 9, the number of employees grew to 30. The production of rotary valves was added and in 1953 all brass instruments were made with 30 specialists (mostly people from Graslitz).
The Staatsarchiv Nurnberg has a document from the Regierung Mittelfranken about a Staatsverbürgter Flüchtlingsproduktivkredit für die Firma F. X. Hüller u. Co., Inh. Ernst Modl, Blechblasinstrumente in Neustadt a.d. Aisch (1950-1961). That implies that he got financial help from the government, a state guaranteed credit, like other fugitives. At another place is mentioned that he got financial help through the Marshall Plan.
Diespeck an der Aisch
In 1954 Modl started the construction of a new company building in Diespeck near Neustadt a/d Aisch, at Sudetenstrasse 7, some 6 km away from the original location. This was registered 10-10-1954. The architect was the husband of his his daughter. In 1956 followed by an extension/enlargement of the workshop, in the end with 60 employees. In 1962 there came a residential building above the factory. In 1963 Modl lives at Zeppelinstrasse 9, Neustadt a/d Aisch, now the adress of Schmidt Verlagsdruckerei.
When Ernst Modl dies in 1972, his daughter closes the factory in 1973 (50-60 craftsman by then) and the workmaster from Modl, Andreas Schmidt opens his own workshop in Neustadt/Aisch under the name Schmidtco. From 1973 Franz Riedl takes over the part of the Emo mutes (Dämpfer), as does his family later. The Emo mute brand now is marketed by GEWA in Adorf, not sure where they are made.
Ernst Modl brass instruments
Ernst Modl started in 1951 with the production of signal horns. The production of rotary valves was added and he picked up the production of bugles, trumpets (piston valves and a few with (top action) rotary valves). Also a few cornets, several slide trombones, a valve trombone and a mellophone are known and then euphoniums are mentioned (but I haven't seen any pictures of them). Throughout his career in Germany Modl used the model names that we know from his time at F.X. Hüller & Co: Professional, Champion and World, with the extensions Super, 'De Luxe', De Luxe Color and an incidental Standard, Ideal.... As far as I can see now, the signal horns, trombones and rotary valve instruments have no serial numbers. The others have, the Emo branded as well as the stencils he made for companies like Ludwig, Smith Music Sales, Buffet Crampon and Rudy Mück. In the serial number list at the bottom of this page I have listed them. The serial numbers I found so far (some 160, including the stencils) reach from 2 till 8125, with one outlier at 12750.
The typical Emo trumpet can be recognized by it's spherical waterkeys, the baluster style bracing and the sloping valve caps and "Selmer' style arched valve stem buttons. The Word models have these 'Olds' style valve casings and bottoms.
'Emo' waterkey
'Emo' valve caps and buttons
'Emo' baluster bracing
'Emo' valve casings
But on a closer look there is more variation, partly because for the early instruments standard parts were used.
Emo Trumpets
Emo Professional
The first few Professional trumpets have the octagonal valve caps and bottoms that are also found on Keilwerth and Wohlrab trumpets. After that they have round caps and bottoms. Then the typical baluster braces also pop up. The waterkey is a traditional one, and stays the same over the years. After finding it's form in the early years the Professional model hasn't changed.
Emo Professional, octagonal valve caps, traditional braces, valve numbers 1,2,3
Emo Professional, octagonal valve caps, serial number 4(?), valve numbers 1,2,3, traditional braces
Emo Professional serial number 2, round valve caps
Emo Professional Bb and C, serial number not known, spin with typical baluster
Emo Professional Bb and C, serial number 46
Emo Professional, serial number 4933, baluster and traditional brace
Emo Professional serial number 8103
Emo Champion
The Emo Champion trumpets all have normal waterkeys, no 'Emo' keys. Between 454 and 747 they get underslung waterkeys, then again normal waterkeys. Somewhere between 2506 and 2676 the valve buttons change from 'Emo' style to 'normal'. The bracings vary but the brace in the main tuning slide mostly is 'Emo'. Most of them have a forwarded position of the valve block ('balanced').
Emo Champion, serial number 18
Emo Champion, serial number 32, different engraving on bell
Emo Champion, serial number 509, underslung waterkey, braces in different styles, hexagonal valve buttons
Emo Champion, serial number 2676, different engraving on bell, underslung waterkey
Emo Champion, serial number 5681, underslung waterkey
Emo Champion Super
The Emo Champion Super all have the typical 'Emo' waterkeys and valve buttons. There's a little variation in the finger hoooks.
Emo Champion Super, serial number 632, different finger hook, 'Emo' waterkeys and valve buttons
.JPG)
.JPG)
Emo Champion Super, serial number 8125, 'Emo' waterkeys and valve buttons
Emo World
The Emo World trumpets have a pretty constant shape, with all the known Emo features, including the 'Olds' style valve casings. Most of them have a forwarded position of the valve block ('balanced').
Emo World, serial number 563, balanced
Emo World, serial number 1933
Emo World, serial number 7688
Emo World, serial number 12750, Bauerfeind valve block. The only Emo with a 5-digit serial number.
Emo World de Luxe
Emo World de Luxe have all the typical Emo features. From a certain point they also have a patented third valve slide hook. This patent from Modl dates from July 18th 1956.
Emo World de Luxe, serial number 1433
Emo World de Luxe, serial number 3865, and the third valve slide hook
There's also a multicolored World de Luxe, the World de Luxe Color. So far only in low serial numbers (81-576).
Emo World de Luxe color, serial number 81
Emo Standard
A rare bird. An Emo Standard, with also F.X.Hüller engraved on the bell. Sold in an auction in Stockholm in 2019. It's the only Emo Standard and also the F.X.Hüller & Co name is seldom used, although it's also found on the trumpet Louis Armstrong got with serial number 2503 but that one got a special inscription with Armstrongs name on it as well.
Emo Standard, F.X.Hüller & Co, serial number 492
Other Emo brass instruments
Trombones
So far I've found several Emo trombones, only the Champion model. The slide trombones seem to have no serial number, apart from one with an 18 on the mouthpiece reciever.
Emo Champion trombone. No serial number.
.jpg){kind=small}
.jpg)
Emo Champion valve trombone. Serial number 172
Alto trombone in Eb
Emo Champion alto trombone.
Cornet
There are some Emo cornets around but not many. So far World is the only model I found.
Emo World cornet
Emo cornet
Flugelhorn
A rotary valve flugelhorn, no model name known.
Emo flugelhorn in Bb, source Yorkmaster
There is one piston valve flugelhorn model Champion known. A low serial number so maybe Modl stopped pretty soon producing them.
Emo Champion flugelhorn, serial number 179
And another one, no model name known but also with baluster type braces.
Emo flugelhorn, source Horn-u-copia.net
Mellophone
A mellophone in Eb.
Emo mellophone in Eb, source Yorkmaster
Rotary valve trumpet
I found one example of an Emo rotary valve trumpet.
Emo rotary valve trumpet, no serial number
Top action rotary valve trumpet
Modl also made a few top action rotary valve trumpets in various pitches, Eb, Bb and C.
Emo World, Eb trumpet, coll. Phil Holcomb, Florida
Emo World Rotary, Bb trumpet, coll.: Gerard Westerhof
'Emo', C trumpet, coll.: University of Ottawa School of Music.
More about these at the Top action rotary valve trumpets page of Brasspedia.
Signal horns
Signalhorns come in different sizes, used by cyclists, fire brigade, train people, hunting and as a foghorn. Other than trumpets they have a harmonica like reed that makes the sound.
Emo small signal horn, 10,15 cm long and sounds like a harmonica, source Ebay.com 2017
Emo signal horn, 28,5 cm long and sounds like a harmonica, source Ebay.de 2019
Emo signal horn, 45 cm long, used at the Reichsbahn, source Ebay.de 2019
Bugles
There are a few Emo bugles, all with one valve, presumably from Bb to Eb. As they all seem to have hexagonal valve caps, I guess they are from the early years.
Emo signal horn, dating before 1965
Emo bugle converted to a lamp....
Emo bugle, source Horn-u-copia.net
Stencils
Bugles
Ludwig
Waterloo Champion
Smith Music Sales
Trumpets
Buffet Crampon
Rudy Muck
Wilhelm Monke
DEG
Schenkelaars
The Louis Armstrong story
Serial number overview
Not all the Modl instruments have serial numbers but I think most have one. And they give a valuable insight in the Emo production. From the first 1000 21 are stencils (mainly bugles) and 32 are Modls own brand. From nr 500 Buffet trumpets chime in, and between 1200 and 4000 Rudy Muck takes 16 against 25 Emo's. 4988 is the 'last' Buffet and highest number so far is 8125.
| Ernst Modl serial number list | ||||||
|---|---|---|---|---|---|---|
| Emo | Ludwig | Buffet Crampon | Rudy Muck | Smith Music Sales | other | |
| number | World | bugle | trumpet | 4M | bugle | Waterloo |
| number | ||||||
| number | ||||||
| number | ||||||
| number | ||||||
| Toneking Super de Luxe | ||||||
| Graslitz, 1940's | 1979 | 1980's | other | |||
| SX 90 R (as of 1993) | ||||||
